We are specialized in comprehensive insulating solutions and are expanding our product range with composite materials that simultaneously perform vapor, hydro, and heat insulating functions. Therefore, most of our rolled materials and protective coatings have high resistance to water vapor diffusion. Protective coatings FOLAR and AL PLAST are generally intended for use in facilities with an increased level of water vapor in the air.
All tapes made on the basis of butyl rubber, which is characterized by low vapor permeability, are of vapor barrier type. These tapes are widely used for the installation of roofing membranes. And internal vapor barrier window tapes ALENOR are an obligatory part of the warm installation of windows.
- Vapor barrier for windows, roofs, walls, ceilings, floors
- Vapor barrier for seams, joints, adjacencies
- Vapor barrier in baths, saunas, facilities with high humidity
is a covering insulating composite reflective material, which consists of aluminum foil and glass mesh.
It is used as a protective insulating coating for the walls of baths and saunas, technical insulation of tanks, pipeline systems and air ducts.
It has high hydro- and vapor-insulating properties. When used indoors, it performs the function of a thermal vapor barrier.
FOLAR prevents the penetration of water vapor into the internal thermal insulation layer and further into the building elements of the structure (walls, ceiling).
We recommend using vapor barriers in facilities with high humidity.
are an important component of the window joint protection system, regulated by European energy-efficient construction standards and requirements for houses built according to the NZEB (Nearly Zero Energy Building) standard.
For vapor barrier of the mounting joint from the inside of permises, we produce two types of internal window tapes: ALENOR INTERNAL FULL GLUE and premium ALENOR INTERNAL (MFPA).
These foil tapes act as a vapor barrier and do not allow moisture to penetrate the PU foam, maintaining its integrity and thermal insulation properties for decades.
We have developed ALENOR WARM WINDOW TECHNOLOGY - a system of ready-made solutions for protecting mounting joints, allowing to make the correct three-level installation of a window using ALENOR window tapes.
Light and invisible water vapor actually has great destructive power. If you do not create a reliable vapor barrier, it penetrates the thermal insulation layer, condenses, moistens it and eventually destroys it. In the absence of thermal insulation, these processes occur directly in the enclosing structures (walls, ceilings, floors).
Window structures suffer the most from the destructive effect of vapor, because the mounting foam, which creates the thermal insulation layer of the installation joint, is hygroscopic. The experiment clearly demonstrates this.
It is to protect the installation joint from the effects of vapor and moisture that we created ALENOR WARM WINDOW TECHNOLOGY.
