Folar С – foil material based on fiberglass mesh, with an adhesive layer
Folar С – foil material based on fiberglass mesh, with an adhesive layer
Covering insulating composite reflective foil material.
Product composition: aluminum foil, reinforced polymer mesh, permanent pressure-sensitive adhesive, release paper.
Scope of application
- The material is used as a reflective, protective insulating coating for technical insulation of containers, pipeline and air duct systems, and walls of baths and saunas
Technical information
- has a high reflection coefficient: reflects more than 95% of the heat emission
- increases the thermal resistance of heat insulation materials
- is flexible and at the same time strong due to the reinforcing mesh
- additionally has vapor insulating and waterproofing properties
- withstands significant mechanical loads
- is resistant to solutions of acids, alkalis and detergents
- retains its properties when heated
- environmentally friendly, does not contain substances harmful to human and animal life
| Width, mm tolerance ± 1,5% | Length, m tolerance ± 1,5% |
|---|---|
| 1000 | 50 |
| Name | Units | Value |
|---|---|---|
| Surface thermal reflection coefficient, not less than | % | 95 |
| Surface density | g/m² | 80±10% |
| Adhesive layer stickiness by rolling sphere method | cm | 4-5 |
| Adhesion strength to steel, not less | N/25 mm | 12 |
Operating temperature range | ˚С | from -40 to +70 |
| Recommended installation temperature | ˚С | from +5 to +40 |
Examples of usage
Get in touch
Have a question? Contact us
