Alufoam NPE С – foil material based on non-crosslinked polyethylene foam, with adhesive layer
Alufoam NPE С – foil material based on non-crosslinked polyethylene foam, with adhesive layer
A complex heat reflecting and vapor barrier material based on uncrosslinked polyethylene foam, with one-sided foiling and adhesive layer. It has a lower density compared to crosslinked types of polyethylene foam.
Product composition: aluminum foil, non-crosslinked polyethylene foam, adhesive layer, protective film.
Scope of application
- insulation of ventilation systems
- insulation of pipes, pipelines in heating, water supply and drainage systems
- insulation of climate equipment
Technical information
- budget option of a complex heat insulating and vapor barrier material
- soft, light, due to the lower density of polyethylene foam
- has a high surface heat reflection coefficient of 95%
- environmentally friendly, does not contain hazardous substances
- resistant to fungi and bacteria
- quickly mounted, thanks to the adhesive layer, does not require special tools for installation
<
| Thickness, mm tolerance ± 0,5 mm | Width, mm tolerance ± 1,5% | Length, m tolerance ± 1,5% |
|---|---|---|
| 3 | 1000 | 25 |
| 5 | 1000 | 25 |
| 8 | 1000 | 25 |
| 10 | 1000 | 25 |
| Name | Units | Value |
|---|---|---|
| Thermal conductivity | W/(m·K) | 0,039 |
| Adhesion strength to steel, not less | N/25mm | 14 |
| Water absorption by volume, no more than | % | 1,2 |
| Surface thermal reflection coefficient, not less than | % | 95 |
| Operating temperature range | ˚С | from -40 to +75 |
| Recommended installation temperature | ˚С | from +5 to +40 |
Examples of usage
Get in touch
Have a question? Contact us
