Alufoam PЕТ С – chemically crosslinked foil foamed polyethylene, with PET coating and adhesive layer
Alufoam PЕТ С – chemically crosslinked foil foamed polyethylene, with PET coating and adhesive layer
A complex heat reflective, hydro-, steam- and noise-insulation material based on chemically cross-linked polyethylene, with one-sided foiling, protected by PET film, and an adhesive layer. PET film protects the foil layer from accidental punctures and scratches, provides high mechanical strength of the product. The adhesive layer has high tackiness to metals, plastics, glass, wood and other surfaces.
Product composition: aluminum foil reinforced with polyethylene terephthalate film, chemically cross-linked foamed polyethylene, adhesive layer, protective film.
Scope of application
- insulation of walls, ceilings, roofs, attics and mansard rooms
- insulation of air duct systems, pipes
- insulation of climate equipment
- insulation in the "warm floor" system
- insulation in rooms that require regular treatment with disinfectants
Technical information
- complex heat-, hydro-, steam- and noise-insulating material
- has excellent heat-insulating and heat-reflecting properties (surface heat reflection coefficient more than 95%)
- has high resistance to acid, alkali and detergent solutions
- resistant to fungi and bacteria
- environmentally friendly, does not contain hazardous substances
- very strong, resistant to damage and scratches thanks to the reinforcing mesh and PET film
- light, elastic, durable
- easy to install, does not require special tools for installation
| Thickness, mm tolerance ± 0,5 mm | Width, mm tolerance ± 1,5% | Length, m tolerance ± 1,5% |
|---|---|---|
| 3 | 1000 | 5; 20 |
| 4 | 1000 | 20 |
| 5 | 1000 | 5; 20 |
| 8 | 1000 | 5; 10 |
| 10 | 1000 | 10 |
| Name | Units | Value |
|---|---|---|
| Inflammability | group | В1 |
| Combustibility | group | G1 |
| Smoke-generating ability | group | D2 |
| Base density | kg/m³ | 30±10% |
| Thermal conductivity | W/(m·K) | 0,037 |
| Tensile strength, not less than | kPа | 150 |
| Elongation at break in the transverse direction, not less than | % | 100 |
| Elongation at break in the longitudinal direction, not less than | % | 90 |
| Compressive strength 25% | kPа | > 30 |
| Peeling force from steel, not less than | N/25mm | 14 |
| Rolling ball stickiness | cm | 5-6 |
| Water absorption by volume, no more than | % | 0,8 |
| Surface thermal reflection coefficient, not less than | % | 95 |
| Operating temperature range | ˚С | from -40 to +80 |
| Recommended installation temperature | ˚С | from +5 to +40 |
Examples of usage
Get in touch
Have a question? Contact us
