Alubond AL PET C – foil material based on non-woven fabric, with PET coating and adhesive layer
Alubond AL PET C – foil material based on non-woven fabric, with PET coating and adhesive layer
Self-adhesive high-strength reinforced reflective insulating foil coating.
Product composition: aluminum foil reinforced with polyethylene terephthalate film, non-woven fabric, high-tack adhesive layer, release film.
Scope of application
- as a top protective coating for existing thermal insulation made of polyethylene foam, mineral wool, synthetic rubber
- insulation of above-ground and underground pipelines, heating mains on top of mineral wool or basalt cylinders
- a budget alternative to a stainless steel protective casing
Technical information
- high thermal resistance
- wide temperature range
- durable, aluminum coating slows down oxidation and corrosion processes
- does not require protective clothing and special tools
- easy to install, compact for transportation, lightweight
- resistant to environmental factors
- environmentally friendly product, does not contain carcinogens and allergens
| Width, mm tolerance ± 1% | Length, m tolerance ± 1,5% |
|---|---|
| 1000 | 50 |
| Name | Units of measurement | Value |
|---|---|---|
| Surface thermal reflection coefficient, not less than | % | 95 |
| Surface density | g/m² | 150 ± 10% |
Tensile strength, not less than (in longitudinal and transverse directions) | N/50 mm | 120 |
Elongation at break, not less (in longitudinal and transverse directions) | % | 80 |
| Adhesion strength to steel, not less | N/25 mm | 12 |
| Rolling ball stickiness | cm | 6-7 |
| Operating temperature range | ˚С | from -40 to +80 |
| Recommended installation temperature | ˚С | from +5 to +40 |
Examples of usage
Get in touch
Have a question? Contact us
